In the wake of the miniaturization of electronics, there are more and more portable devices. Portable devices usually use battery power. However, due to the limited density of battery energy, the battery life is limited. Ordinary charging can no longer meet the user’s needs, and rapid charging technology has gradually become a market trend. Rapid charge technology is mainly applied in the mobile phone and automotive fields. For the rapid charge market, Asian Power Devices Inc. (APD) has developed the new PD 45W Rapid Charge Power Source based on market demand. This rapid charge product can be widely used for numerous battery configurations including devices, such as mobile phones, tablets, notebooks, etc.
Rapid Charging Technology is the Future
Current mainstream mobile phone rapid charge technology includes: VOOC flash charge, Qualcomm Quick Charge, MediaTek Pump Express Plus, Huawei’s FCP and Super Charge. In order to standardize the rapid charge technology, recently the USB-IF (USB Standardization Organization) announced an important update of USB PD 3.0, aimed at standardizing PPS (Programmable Power Supply) of rapid charge technology. In order to make Qualcomm’s QC4.0/3.0, Mediatek’s PE3.0/2.0, Huawei/OPPO and others a reality, adjustments have been made and the USB interface is not allowed to perform voltage adjustment through the non-USB PD protocol.
Developed by APD the PD45W Rapid Charge complies with the PD-XF rapid charge specification of USB-IF, and is reverse compatible with QC2.0/3.0, PD2.0, etc. For output voltage using 5V/9V/12V/15V/19V the /20V its six-set voltage design meets the charging needs for a variety of customer systems. Designed to be smaller, its volume is < 100 cc.
Our Products Comply with Global Safety Standards
The NW series of products utilize an interchangeable plug design, can be equipped with multi-national plugs, and can be sold to China, the United States, Britain, Brazil, Australia, Germany, Mexico, France, India, Argentina, Thailand, South Korea and more than 90 other countries and regions.
The superior performance and energy efficiency of our rapid-charge products complies with the EU’s latest COC Tier 2 energy efficiency regulations and the DOE level VI regulations for the American market. The safety components conform to the IEC60950-1 standard. The ESD meets the IEC61000-4-2 standard of air discharge (15KV); and the high market standards for contact discharge (8KV). At the same time, these electrical products have a variety of protection functions, such as output short circuit (SCP), over-voltage (OVP), over-current (OCP) and other protections, allowing the customer’s system to have a more secure power supply protection.
With the development of portable electronic devices, more and more electronic products are equipped with touch control screens. However, if the general noise setting for the power supply switch is too loud, it will cause the control screen to malfunction and affect the device’s performance. After years of development, APD technology has specifically optimized the functionality with touch screens, and these power supply products comply with the IEC62684 standard. Our power supply products are a great solution for users who wish to continue playing while charging, without worrying about the annoyance of screen malfunctions.